AdminGuide:GettingStarted:VM:VMWare

Return to AdminGuide:GettingStarted:VM

1. Download the KalliopePBX virtual image file. KalliopePBX VM is available in VMWare ESXi 5.x environment or later.

The OVA file can be downloaded at the following link:

KalliopePBXv4_esxi5_bl-1.0.5-7156.ova (md5: A3CE948432336DBEF32A68EE165005C1 - sha256: BB02938985BAE46641A33E4CC8D5FAB784AD9F54A72704C6010A6E949B63A202)

2. Import the downloaded image file into the virtual environment. Upon booting for the first time, the VM will start in recovery mode.

3. Access the predefined address 192.168.0.100:10080 from the GUI. If the OVA has bootloader version 1.0.5 or later, there is a console access (with manager/manager credentials) that allows you to change the IP address of the eth0 interface if it's not possible to access the predefined address.

4. Go to the Tools menu (click on the icon) in the top right to change your network configuration so that the PBX can access the internet and reach the license server.

5. Activate the KalliopePBX VM license with the activation key you were provided.

6. Once the license has been activated, click on "Register product" to access the Recovery console.

7. Follow this procedure to update the bootloader to the latest version.

8. Once the update is finished, click "Restart bootloader" to restart the machine.
The machine will always restart in recovery mode.

9. Click "Find updates" again to download the list of available firmware updates and select the version you want.

10. Click on "Install on the primary partition (p5)". KalliopePBX will warn you that this will reset the partition erasing all data and ask for confirmation
Since this is the first installation, confirm the request.
N.B.: Installing firmware from the recovery console will restore the machine to factory conditions. This can be useful when you need to completely reset a machine.

11. Una volta completata l'installazione del firmware selezionato verificare nella console di ripristino la versione firmware installata.

12. Tramite il menu tools selezionare la voce "Menu di spegnimento->Riavvia", scegliere la voce "Firmware primario" dal menu di riavvio e cliccare sul pulsante "Riavvia".

13. Al riavvio si è ridiretti al login principale (sulla porta 80).

Le credenziali di login di default sono
Username: admin
Password: admin

Si consiglia di modificare la password di default al primo avvio.