Differenze tra le versioni di "AdminGuide:GUI:SystemMenu:RecoveryMode/en"

Da Kalliope Wiki.
Jump to navigation Jump to search
(Creata pagina con "The recovery console displays information on the product and the firmware, and lets you:")
(Creata pagina con "* register the product (this serves as a timestamp for the beginning of the warranty and free firmware updates); * AdminGuide:GettingStarted:VM/en|activate a virtual machine...")
Riga 9: Riga 9:
The recovery console displays information on the product and the firmware, and lets you:
The recovery console displays information on the product and the firmware, and lets you:


* Registrare il prodotto (serve come timestamp di inizio garanzia ed aggiornamenti firmware gratuiti)
* register the product (this serves as a timestamp for the beginning of the warranty and free firmware updates);
* [[AdminGuide:GettingStarted:VM|Attivare la macchina virtuale utilizzando l'Activation Key (solo per le VM)]]
* [[AdminGuide:GettingStarted:VM/en|activate a virtual machine using an activation key (only for VM)]];
* [[Aggiornamento bootloader|Aggiornare il bootloader]]
* [[AdminGuide:Procedures:BootloaderUpdate/en|update the bootloader]];
* Reset to factory default mediante installazione del firmware su una partizione
* reset to factory default by installing firmware on a partition.





Versione delle 09:14, 26 feb 2018

Altre lingue:

Return to AdminGuide:GUI:SystemMenu


Console Ripristino.png

You can access the KalliopePBX recovery console from the resource IP address (192.168.0.100 by default) on port 10080 in HTTP or 10043 in HTTPS.

The recovery console displays information on the product and the firmware, and lets you:


Per ogni release, cliccandoci sopra, è possibile sapere quali nuove funzionalità sono state introdotte e quali bug corretti. E' possibile, inoltre, scegliere su quale partizione installare il firmware selezionato.

ATTENZIONE: L'installazione di un firmware da console di ripristino cancella tutti i dati presenti sulla partizione. L'aggiornamento del firmware non si effettua da console di ripristino ma dalla GUI di configurazione di Kalliope.