Differenze tra le versioni di "AdminGuide:GettingStarted:V4R/V4R+/en"
Jump to navigation
Jump to search
(Creata pagina con "AdminGuide:GettingStarted:V4R/V4R+") |
|||
(11 versioni intermedie di 3 utenti non mostrate) | |||
Riga 1: | Riga 1: | ||
<languages /> | <languages /> | ||
Return to [[AdminGuide:GettingStarted/en|AdminGuide:GettingStarted]] | |||
==Port description== | |||
== | |||
[[File:Retro V4R.png|sinistra]] <br /> | [[File:Retro V4R.png|sinistra]] <br /> | ||
Riga 19: | Riga 18: | ||
#HDMI (unused) | #HDMI (unused) | ||
#Audio jack (unused) | #Audio jack (unused) | ||
#COM1 ( Console 115200 8/n/1) | #COM1 (Console 115200 8/n/1) | ||
== | ==Installation== | ||
* | *Connect KalliopePBX to your network using the eth0 interface. | ||
* | *Optional: connect KalliopePBX's COM1 serial port to your PC using a serial cable (not included - settings: 115200 8/n/1). | ||
* | *Connect the included power cord to KalliopePBX and plug it into a power socket (100-240V AC, 50-60 Hz). | ||
* | *Turn on KalliopePBX by pressing the power button in front; should it be unexpectedly disconnected from the power supply, it will automatically reboot once power is restored. | ||
* | * Open http://192.168.0.100:10080 on your browser to register. KalliopePBX will require access to https://license.kalliopepbx.it; the network configuration can be edited from the "settings" menu. In case the error '''UNSAFE_PORT''' appears follow this procedure: [[AdminGuide:Procedures:ERR_UNSAFE_PORT_resolution_for_Chrome_and_Firefox/en|Click here]]<br> | ||
* | *After registering, choose and install the desired firmware from those available. KalliopePBX will require access to the address https://updates.kalliopepbx.it. The process may take a few minutes, depending on the size of the firmware and your network speed. | ||
*Follow the firmware installation progress; once it's over, restart KalliopePBX and access the configuration interface by opening http://<Configured_ip> (default http port 80) on your browser. The default credentials are admin/admin. |
Versione attuale delle 14:33, 16 feb 2022
Return to AdminGuide:GettingStarted
Port description
- Power (12v, 5A)
- VGA (unused)
- USB 2.0/USB 3.0
- Gigabit Ethernet (eth0)
- Gigabit Ethernet (eth1)
- HDMI (unused)
- Audio jack (unused)
- COM1 (Console 115200 8/n/1)
Installation
- Connect KalliopePBX to your network using the eth0 interface.
- Optional: connect KalliopePBX's COM1 serial port to your PC using a serial cable (not included - settings: 115200 8/n/1).
- Connect the included power cord to KalliopePBX and plug it into a power socket (100-240V AC, 50-60 Hz).
- Turn on KalliopePBX by pressing the power button in front; should it be unexpectedly disconnected from the power supply, it will automatically reboot once power is restored.
- Open http://192.168.0.100:10080 on your browser to register. KalliopePBX will require access to https://license.kalliopepbx.it; the network configuration can be edited from the "settings" menu. In case the error UNSAFE_PORT appears follow this procedure: Click here
- After registering, choose and install the desired firmware from those available. KalliopePBX will require access to the address https://updates.kalliopepbx.it. The process may take a few minutes, depending on the size of the firmware and your network speed.
- Follow the firmware installation progress; once it's over, restart KalliopePBX and access the configuration interface by opening http://<Configured_ip> (default http port 80) on your browser. The default credentials are admin/admin.