AdminGuide:GettingStarted:V4R/V4R+
Jump to navigation
Jump to search
Return to AdminGuide:GettingStarted
Port description
- Power (12v, 5A)
- VGA (unused)
- USB 2.0/USB 3.0
- Gigabit Ethernet (eth0)
- Gigabit Ethernet (eth1)
- HDMI (unused)
- Audio jack (unused)
- COM1 (Console 115200 8/n/1)
Installation
- Connect KalliopePBX to your network using the eth0 interface.
- Optional: connect KalliopePBX's COM1 serial port to your PC using a serial cable (not included - settings: 115200 8/n/1).
- Connect the included power cord to KalliopePBX and plug it into a power socket (100-240V AC, 50-60 Hz).
- Turn on KalliopePBX by pressing the power button in front; should it be unexpectedly disconnected from the power supply, it will automatically reboot once power is restored.
- Open http://192.168.0.100:10080 on your browser to register. KalliopePBX will require access to https://license.kalliopepbx.it; the network configuration can be edited from the "settings" menu. In case the error UNSAFE_PORT appears follow this procedure: Click here
- After registering, choose and install the desired firmware from those available. KalliopePBX will require access to the address https://updates.kalliopepbx.it. The process may take a few minutes, depending on the size of the firmware and your network speed.
- Follow the firmware installation progress; once it's over, restart KalliopePBX and access the configuration interface by opening http://<Configured_ip> (default http port 80) on your browser. The default credentials are admin/admin.