Visualizza wikitesto di AdminGuide:GettingStarted:V4R/V4R+/en

<languages />
Return to [[AdminGuide:GettingStarted/en|AdminGuide:GettingStarted]]


==Port description==

[[File:Retro V4R.png|sinistra]] <br />

<br />
<br />


#Power (12v, 5A)
#VGA (unused)
#USB 2.0/USB 3.0
#Gigabit Ethernet (eth0)
#Gigabit Ethernet (eth1)
#HDMI (unused)
#Audio jack (unused)
#COM1 (Console 115200 8/n/1)



==Installation==

*Connect KalliopePBX to your network using the eth0 interface.
*Optional: connect KalliopePBX's COM1 serial port to your PC using a serial cable  (not included - settings: 115200 8/n/1).
*Connect the included power cord to KalliopePBX and plug it into a power socket (100-240V AC, 50-60 Hz).
*Turn on KalliopePBX by pressing the power button in front; should it be unexpectedly disconnected from the power supply, it will automatically reboot once power is restored.
* Open http://192.168.0.100:10080 on your browser to register. KalliopePBX will require access to https://license.kalliopepbx.it; the network configuration can be edited from the "settings" menu. In case the error '''UNSAFE_PORT''' appears follow this procedure: [[AdminGuide:Procedures:ERR_UNSAFE_PORT_resolution_for_Chrome_and_Firefox/en|Click here]]<br>
*After registering, choose and install the desired firmware from those available. KalliopePBX will require access to the address https://updates.kalliopepbx.it. The process may take a few minutes, depending on the size of the firmware and your network speed.
*Follow the firmware installation progress; once it's over, restart KalliopePBX and access the configuration interface by opening http://<Configured_ip> (default http port 80) on your browser. The default credentials are admin/admin.