AdminGuide:Service:SNMP

Da Kalliope Wiki.
Jump to navigation Jump to search
Altre lingue:

Torna a AdminGuide:Service KalliopePBX espone delle MIB che consentono il monitoraggio del funzionamento dell’apparato tramite il protocollo di comunicazione standard SNMP.

Le MIB SNMP consultabili su Kalliope sono:

  • MIB-II standard (RFC 1213) – Questa MIB definisce gli oggetti per la gestione e il monitoraggio di un apparato in una rete TCP/IP, in particolare su Kalliope sono implementati i seguenti sottoalberi: system, interfaces, at, ip, icmp, tcp, udp, transmission, snmp OID: 1.3.6.1.2.1.1/2/3/4/5/6/7/10/11

https://datatracker.ietf.org/doc/rfc1213/

  • Host Resource MIB (RFC 2790) - Questa MIB definisce un insieme di oggetti contenenti la configurazione di host (server/computer) collegati ad una rete TCP/IP indipendentemente dal sistema operativo, dai servizi di rete e dalle applicazioni software installate. OID: 1.3.6.1.2.1.25

https://datatracker.ietf.org/doc/rfc2790/

  • UCD-SNMP-MIB – Questa MIB definisce gli oggetti per il monitoraggio delle performance di un host (ad es. CPU /RAM / occupazione dischi). OID: 1.3.6.1.4.1.2021

http://www.net-snmp.org/mibs/UCD-SNMP-MIB.txt

  • Kalliope MIB: questa MIB proprietaria fornisce informazioni aggiuntive sulla configurazione e il funzionamento dei servizi implementati sul nodo Kalliope come ad es. numero di account configurati o registrati, chiamate contemporanee, numero totale di chiamate. OID:1.3.6.1.4.1.33732
NETRESULTS-MIB DEFINITIONS ::= BEGIN

IMPORTS
	enterprises, MODULE-IDENTITY
		FROM SNMPv2-SMI;

netresults 	MODULE-IDENTITY
		LAST-UPDATED	"201801070200Z"
		ORGANIZATION	"NetResults Srl"
		CONTACT-INFO
			"NetResults Support
			Email: support@netresults.it"
		DESCRIPTION
			"The NetResults private-enterprise MIB"
		REVISION	"201807010200Z"
		DESCRIPTION
			"Initial revision."
		::= { enterprises 33732 }

kalliope	OBJECT IDENTIFIER ::= { netresults 1 }

END

KALLIOPEPBX-MIB DEFINITIONS ::= BEGIN

IMPORTS
	OBJECT-TYPE, MODULE-IDENTITY, Integer32, Counter32, TimeTicks,
	Unsigned32, Gauge32
		FROM SNMPv2-SMI

	netresults, kalliope
		FROM NETRESULTS-MIB;

kalliopepbx MODULE-IDENTITY
	LAST-UPDATED	"201801240025Z"
	ORGANIZATION	"NetResults Srl"
	CONTACT-INFO	"NetResults Srl
			support@netresults.it"
	DESCRIPTION
		"KalliopePBX.  This MIB defined
		objects for managing KalliopepBX nodes."
	REVISION	"201801082025Z"
	DESCRIPTION
		"Initial published revision."
	REVISION	"201801240025Z"
	DESCRIPTION
		"Added kPbxNodeInfoServicesAsterisk subtree"
	REVISION	"201807250025Z"
	DESCRIPTION
		"Whole kalliopepbx sub-tree reorganization"
	::= { kalliope  1 }

-- textual conventions

KBytes ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "Storage size, expressed in units of 1024 bytes."
    SYNTAX Integer32 (0..2147483647)

kpbxNode            OBJECT IDENTIFIER ::= { kalliopepbx 1 }
kpbxNodeInfo        OBJECT IDENTIFIER ::= { kpbxNode 1 }
kpbxNodeServices    OBJECT IDENTIFIER ::= { kpbxNode 2 }
kpbxNodeSecurity    OBJECT IDENTIFIER ::= { kpbxNode 3 }
kpbxNodeTenants     OBJECT IDENTIFIER ::= { kpbxNode 4 }
kpbxNodeAccounts    OBJECT IDENTIFIER ::= { kpbxNode 5 }
kpbxNodeCalls       OBJECT IDENTIFIER ::= { kpbxNode 6 }

--
-- kpbxNodeInfo
--
kpbxNodeInfoSystem  OBJECT IDENTIFIER ::= { kpbxNodeInfo 1 }
kpbxNodeInfoVersion OBJECT IDENTIFIER ::= { kpbxNodeInfo 2 }

--
-- kpbxNodeInfoSystem
--

-- kpbxNodeInfoSysPartNumber
kpbxNodeInfoSysPartNumber OBJECT-TYPE
    SYNTAX     DisplayString
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "KalliopePBX part number."
     ::= { kpbxNodeInfoSystem 1 }

-- kpbxNodeInfoSysHWId
kpbxNodeInfoSysHWId OBJECT-TYPE
    SYNTAX     DisplayString
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "KalliopePBX hardware ID."
     ::= { kpbxNodeInfoSystem 2 }

-- kpbxNodeInfoSysSerialNumber
kpbxNodeInfoSysSerialNumber OBJECT-TYPE
    SYNTAX     DisplayString
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "KalliopePBX serial number."
     ::= { kpbxNodeInfoSystem 3 }

--
-- kpbxNodeInfoVersion
--

-- kpbxNodeInfoVersionPrimaryFirmware
kpbxNodeInfoVersionPrimaryFirmware OBJECT-TYPE
    SYNTAX     DisplayString
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "Version of the primary firmware."
     ::= { kpbxNodeInfoVersion 1 }

-- kpbxNodeInfoVersionSecondaryFirmware
kpbxNodeInfoVersionSecondaryFirmware OBJECT-TYPE
    SYNTAX     DisplayString
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "Version of the secondary firmware."
     ::= { kpbxNodeInfoVersion 2 }

-- kpbxNodeInfoVersionBootloader
kpbxNodeInfoVersionBootloader OBJECT-TYPE
    SYNTAX     DisplayString
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "Version of the bootloader."
     ::= { kpbxNodeInfoVersion 3 }

-- kpbxNodeInfoVersionRunning
kpbxNodeInfoVersionRunning OBJECT-TYPE
    SYNTAX     DisplayString
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "Version of the running firmware."
     ::= { kpbxNodeInfoVersion 4 }

--
-- kpbxNodeServices
--
kpbxNodeServicesAsterisk OBJECT IDENTIFIER ::= { kpbxNodeServices 1 }

--
-- kpbxNodeServicesAsterisk
--

-- kpbxNodeServicesAsteriskUpTime
kpbxNodeServicesAsteriskUpTime OBJECT-TYPE
	SYNTAX		TimeTicks
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Time ticks since Asterisk was started."
	::= { kpbxNodeServicesAsterisk 1 }

-- kpbxNodeServicesAsteriskReloadTime
kpbxNodeServicesAsteriskReloadTime OBJECT-TYPE
	SYNTAX		TimeTicks
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Time ticks since Asterisk was last reloaded."
	::= { kpbxNodeServicesAsterisk 2 }

-- kpbxNodeServicesAsteriskVMSize
kpbxNodeServicesAsteriskVMSize OBJECT-TYPE
    SYNTAX     KBytes
    UNITS      "KBytes"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "Virtual memory size for Asterisk process."
     ::= { kpbxNodeServicesAsterisk 3 }

-- kpbxNodeServicesAsteriskVMRSS
kpbxNodeServicesAsteriskVMRSS OBJECT-TYPE
    SYNTAX     KBytes
    UNITS      "KBytes"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "Resident set size for Asterisk process."
     ::= { kpbxNodeServicesAsterisk 4 }

--
-- kpbxNodeSecurity
--
kpbxNodeSecuritySip OBJECT IDENTIFIER ::= { kpbxNodeSecurity 1 }

--
-- kalliopePbxNodeSecuritySip
--

-- kpbxNodeSecuritySipTotalAuthFailed
kpbxNodeSecuritySipTotalAuthFailed OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The total number of autentication failed since last restart."
	::= { kpbxNodeSecuritySip 1 }

-- kpbxNodeSecuritySipBadPasswordAuthFailed
kpbxNodeSecuritySipBadPasswordAuthFailed OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The number of autentication failed due to incorrect password since last restart."
	::= { kpbxNodeSecuritySip 2 }

-- kpbxNodeSecuritySipACLAuthFailed
kpbxNodeSecuritySipACLAuthFailed OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The number of autentication failed due to source IP address violating ACL since last restart."
	::= { kpbxNodeSecuritySip 3 }

--
-- kpbxNodeTenants
--

-- kpbxNodeNumTenants
kpbxNodeNumTenants OBJECT-TYPE
	SYNTAX		Unsigned32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The number of tenants currently defined."
	::= { kpbxNodeTenants 1 }

--
-- kpbxNodeAccounts
--

-- kpbxNodeTotalAccountsConfigured
kpbxNodeTotalAccountsConfigured OBJECT-TYPE
	SYNTAX		Unsigned32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The total number of configured accounts."
	::= { kpbxNodeAccounts 1 }

-- kpbxNodeTotalAccountsReachable
kpbxNodeTotalAccountsReachable OBJECT-TYPE
	SYNTAX		Unsigned32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The total number of accounts registered and reachable with RTT < 2000ms."
	::= { kpbxNodeAccounts 2 }

-- kpbxNodeTotalAccountsUnreachable
kpbxNodeTotalAccountsUnreachable OBJECT-TYPE
	SYNTAX		Unsigned32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The total number of accounts registered and unreachable."
	::= { kpbxNodeAccounts 3 }

-- kpbxNodeTotalAccountsNotRegistered
kpbxNodeTotalAccountsNotRegistered OBJECT-TYPE
	SYNTAX		Unsigned32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The total number of not registered accounts."
	::= { kpbxNodeAccounts 4 }

-- kpbxNodeTotalAccountsLagged
kpbxNodeTotalAccountsLagged OBJECT-TYPE
	SYNTAX		Unsigned32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The total number of accounts registered and reachable with RTT >= 2000ms."
	::= { kpbxNodeAccounts 5 }

--
-- kpbxNodeCallsActive
--
kpbxNodeCallsActive             OBJECT IDENTIFIER ::= { kpbxNodeCalls 1 }
kpbxNodeCallsActiveAllTenants   OBJECT IDENTIFIER ::= { kpbxNodeCallsActive 1 }

-- kpbxNodeCurrentCallsAllTotal
kpbxNodeCurrentCallsAllTotal OBJECT-TYPE
	SYNTAX		Unsigned32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The total number of current calls for all tenants."
	::= { kpbxNodeCallsActiveAllTenants 1 }

-- kpbxNodeCurrentCallsAllIn
kpbxNodeCurrentCallsAllIn OBJECT-TYPE
	SYNTAX		Unsigned32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The total number of current incoming calls for all tenants."
	::= { kpbxNodeCallsActiveAllTenants 2 }

-- kpbxNodeCurrentCallsAllOut
kpbxNodeCurrentCallsAllOut OBJECT-TYPE
	SYNTAX		Unsigned32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The total number of current outgoing calls for all tenants."
	::= { kpbxNodeCallsActiveAllTenants 3 }

-- kpbxNodeCurrentCallsAllLocal
kpbxNodeCurrentCallsAllLocal OBJECT-TYPE
	SYNTAX		Unsigned32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The total number of current local calls for all tenants."
	::= { kpbxNodeCallsActiveAllTenants 4 }

--
-- kpbxNodeCallsProcessed
--
kpbxNodeCallsProcessed              OBJECT IDENTIFIER ::= { kpbxNodeCalls 2 }
kpbxNodeCallsProcessedAllTenants    OBJECT IDENTIFIER ::= { kpbxNodeCallsProcessed 1 }

-- kpbxNodeProcessedCallsAllTotal
kpbxNodeProcessedCallsAllTotal OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The total number of processed calls for all tenants from last boot."
	::= { kpbxNodeCallsProcessedAllTenants 1 }

END
Estratto da "https://www.kalliope.com/wiki/index.php?title=AdminGuide:Service:SNMP&oldid=8996"