AdminGuide:Procedures:V3BackupConversion
Return to AdminGuide:Procedures
KalliopePBX V4 comes with much improved PBX configuration logic. Because of this, V3 and V4 configurations are not directly compatible.
In order to aid migration, we have developed a built-in tool available for firmware version 4.2.0 or later. This tool converts a backup from V3 to V4, except for a few elements that cannot be remapped and must therefore be handled manually.
Requirements:
- KalliopePBX V4 with firmware version 4.2.0 (or later) with factory settings
- V3 configuration backup made with firmware version 3.12.3
To restore a V3 configuration you must go to the Backup page from the system menu and click on Import Kalliope V3 backup, as shown below.
Before uploading the backup, carefully read all information provided by the system, the click on Choose file and select the V3 configuration backup you wish to convert.
You will now see a summary page showing the details of the selected backup. Once you have made sure it is the correct file, click on Confirm.
Il sistema riporterà quindi la configurazione contenuta nel file sul nuovo PBX. Degli alert indicheranno quali parti della configurazione non è stato possibile migrare e che l'utente dovrà riconfigurare a mano.
ATTENZIONE: Prendere nota degli alert visualizzati prima di uscire dalla schermata di importazione del backup.
A questo punto la configurazione contenuta nel backup è stata importata e resa operativa ed è possibile visualizzarla navigando tra le pagine di KalliopePBX.