AdminGuide:Service:SNMP

Da Kalliope Wiki.
Versione del 26 set 2018 alle 10:45 di Silvia (discussione | contributi) (Creata pagina con "*Kalliope MIB - This proprietary MIB provides information on the configuration and the functioning of the services implemented on the Kalliope node, such as number of configur...")
Jump to navigation Jump to search
Altre lingue:

KalliopePBX implements MIBs that allow you to monitor the functioning of the equipment through the SNMP standard communication protocol.

The MIBs that can be consulted are:

  • RFC1213-MIB - This MIB defins objects objects for managing and monitoring an entity in a TCP/IP network. On KalliopePBX the following subtrees are implemented: system, interfaces, at, ip, icmp, tcp, udp, transmission, snmp OID: 1.3.6.1.2.1.1/2/3/4/5/6/7/10/11

https://datatracker.ietf.org/doc/rfc1213/

  • RFC 2790 Host Resources MIB - This MIB defines a set of objects containing the configuration of hosts (servers/computers) connected to a TCP/IP network independently of the operating system, the network services, and the installed software. OID: 1.3.6.1.2.1.25

https://datatracker.ietf.org/doc/rfc2790/

  • UCD-SNMP-MIB - This MIB defines objects for monitoring the performance of a host (e.g. CPU /RAM / disk occupation). OID: 1.3.6.1.4.1.2021

http://www.net-snmp.org/mibs/UCD-SNMP-MIB.txt

  • Kalliope MIB - This proprietary MIB provides information on the configuration and the functioning of the services implemented on the Kalliope node, such as number of configured or registered accounts, simultaneous calls, total number of calls. OID:1.3.6.1.4.1.33732
NETRESULTS-MIB DEFINITIONS ::= BEGIN

IMPORTS
	enterprises, MODULE-IDENTITY
		FROM SNMPv2-SMI;

netresults 	MODULE-IDENTITY
		LAST-UPDATED	"201801070200Z"
		ORGANIZATION	"NetResults Srl"
		CONTACT-INFO
			"NetResults Support
			Email: support@netresults.it"
		DESCRIPTION
			"The NetResults private-enterprise MIB"
		REVISION	"201807010200Z"
		DESCRIPTION
			"Initial revision."
		::= { enterprises 33732 }

kalliope	OBJECT IDENTIFIER ::= { netresults 1 }

END

KALLIOPEPBX-MIB DEFINITIONS ::= BEGIN

IMPORTS
	OBJECT-TYPE, MODULE-IDENTITY, Integer32, Counter32, TimeTicks,
	Unsigned32, Gauge32
		FROM SNMPv2-SMI

	netresults, kalliope
		FROM NETRESULTS-MIB;

kalliopepbx MODULE-IDENTITY
	LAST-UPDATED	"201801240025Z"
	ORGANIZATION	"NetResults Srl"
	CONTACT-INFO	"NetResults Srl
			support@netresults.it"
	DESCRIPTION
		"KalliopePBX.  This MIB defined
		objects for managing KalliopepBX nodes."
	REVISION	"201801082025Z"
	DESCRIPTION
		"Initial published revision."
	REVISION	"201801240025Z"
	DESCRIPTION
		"Added kPbxNodeInfoServicesAsterisk subtree"
	REVISION	"201807250025Z"
	DESCRIPTION
		"Whole kalliopepbx sub-tree reorganization"
	::= { kalliope  1 }

-- textual conventions

KBytes ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "Storage size, expressed in units of 1024 bytes."
    SYNTAX Integer32 (0..2147483647)

kpbxNode            OBJECT IDENTIFIER ::= { kalliopepbx 1 }
kpbxNodeInfo        OBJECT IDENTIFIER ::= { kpbxNode 1 }
kpbxNodeServices    OBJECT IDENTIFIER ::= { kpbxNode 2 }
kpbxNodeSecurity    OBJECT IDENTIFIER ::= { kpbxNode 3 }
kpbxNodeTenants     OBJECT IDENTIFIER ::= { kpbxNode 4 }
kpbxNodeAccounts    OBJECT IDENTIFIER ::= { kpbxNode 5 }
kpbxNodeCalls       OBJECT IDENTIFIER ::= { kpbxNode 6 }

--
-- kpbxNodeInfo
--
kpbxNodeInfoSystem  OBJECT IDENTIFIER ::= { kpbxNodeInfo 1 }
kpbxNodeInfoVersion OBJECT IDENTIFIER ::= { kpbxNodeInfo 2 }

--
-- kpbxNodeInfoSystem
--

-- kpbxNodeInfoSysPartNumber
kpbxNodeInfoSysPartNumber OBJECT-TYPE
    SYNTAX     DisplayString
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "KalliopePBX part number."
     ::= { kpbxNodeInfoSystem 1 }

-- kpbxNodeInfoSysHWId
kpbxNodeInfoSysHWId OBJECT-TYPE
    SYNTAX     DisplayString
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "KalliopePBX hardware ID."
     ::= { kpbxNodeInfoSystem 2 }

-- kpbxNodeInfoSysSerialNumber
kpbxNodeInfoSysSerialNumber OBJECT-TYPE
    SYNTAX     DisplayString
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "KalliopePBX serial number."
     ::= { kpbxNodeInfoSystem 3 }

--
-- kpbxNodeInfoVersion
--

-- kpbxNodeInfoVersionPrimaryFirmware
kpbxNodeInfoVersionPrimaryFirmware OBJECT-TYPE
    SYNTAX     DisplayString
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "Version of the primary firmware."
     ::= { kpbxNodeInfoVersion 1 }

-- kpbxNodeInfoVersionSecondaryFirmware
kpbxNodeInfoVersionSecondaryFirmware OBJECT-TYPE
    SYNTAX     DisplayString
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "Version of the secondary firmware."
     ::= { kpbxNodeInfoVersion 2 }

-- kpbxNodeInfoVersionBootloader
kpbxNodeInfoVersionBootloader OBJECT-TYPE
    SYNTAX     DisplayString
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "Version of the bootloader."
     ::= { kpbxNodeInfoVersion 3 }

-- kpbxNodeInfoVersionRunning
kpbxNodeInfoVersionRunning OBJECT-TYPE
    SYNTAX     DisplayString
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "Version of the running firmware."
     ::= { kpbxNodeInfoVersion 4 }

--
-- kpbxNodeServices
--
kpbxNodeServicesAsterisk OBJECT IDENTIFIER ::= { kpbxNodeServices 1 }

--
-- kpbxNodeServicesAsterisk
--

-- kpbxNodeServicesAsteriskUpTime
kpbxNodeServicesAsteriskUpTime OBJECT-TYPE
	SYNTAX		TimeTicks
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Time ticks since Asterisk was started."
	::= { kpbxNodeServicesAsterisk 1 }

-- kpbxNodeServicesAsteriskReloadTime
kpbxNodeServicesAsteriskReloadTime OBJECT-TYPE
	SYNTAX		TimeTicks
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Time ticks since Asterisk was last reloaded."
	::= { kpbxNodeServicesAsterisk 2 }

-- kpbxNodeServicesAsteriskVMSize
kpbxNodeServicesAsteriskVMSize OBJECT-TYPE
    SYNTAX     KBytes
    UNITS      "KBytes"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "Virtual memory size for Asterisk process."
     ::= { kpbxNodeServicesAsterisk 3 }

-- kpbxNodeServicesAsteriskVMRSS
kpbxNodeServicesAsteriskVMRSS OBJECT-TYPE
    SYNTAX     KBytes
    UNITS      "KBytes"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "Resident set size for Asterisk process."
     ::= { kpbxNodeServicesAsterisk 4 }

--
-- kpbxNodeSecurity
--
kpbxNodeSecuritySip OBJECT IDENTIFIER ::= { kpbxNodeSecurity 1 }

--
-- kalliopePbxNodeSecuritySip
--

-- kpbxNodeSecuritySipTotalAuthFailed
kpbxNodeSecuritySipTotalAuthFailed OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The total number of autentication failed since last restart."
	::= { kpbxNodeSecuritySip 1 }

-- kpbxNodeSecuritySipBadPasswordAuthFailed
kpbxNodeSecuritySipBadPasswordAuthFailed OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The number of autentication failed due to incorrect password since last restart."
	::= { kpbxNodeSecuritySip 2 }

-- kpbxNodeSecuritySipACLAuthFailed
kpbxNodeSecuritySipACLAuthFailed OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The number of autentication failed due to source IP address violating ACL since last restart."
	::= { kpbxNodeSecuritySip 3 }

--
-- kpbxNodeTenants
--

-- kpbxNodeNumTenants
kpbxNodeNumTenants OBJECT-TYPE
	SYNTAX		Unsigned32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The number of tenants currently defined."
	::= { kpbxNodeTenants 1 }

--
-- kpbxNodeAccounts
--

-- kpbxNodeTotalAccountsConfigured
kpbxNodeTotalAccountsConfigured OBJECT-TYPE
	SYNTAX		Unsigned32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The total number of configured accounts."
	::= { kpbxNodeAccounts 1 }

-- kpbxNodeTotalAccountsReachable
kpbxNodeTotalAccountsReachable OBJECT-TYPE
	SYNTAX		Unsigned32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The total number of accounts registered and reachable with RTT < 2000ms."
	::= { kpbxNodeAccounts 2 }

-- kpbxNodeTotalAccountsUnreachable
kpbxNodeTotalAccountsUnreachable OBJECT-TYPE
	SYNTAX		Unsigned32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The total number of accounts registered and unreachable."
	::= { kpbxNodeAccounts 3 }

-- kpbxNodeTotalAccountsNotRegistered
kpbxNodeTotalAccountsNotRegistered OBJECT-TYPE
	SYNTAX		Unsigned32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The total number of not registered accounts."
	::= { kpbxNodeAccounts 4 }

-- kpbxNodeTotalAccountsLagged
kpbxNodeTotalAccountsLagged OBJECT-TYPE
	SYNTAX		Unsigned32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The total number of accounts registered and reachable with RTT >= 2000ms."
	::= { kpbxNodeAccounts 5 }

--
-- kpbxNodeCallsActive
--
kpbxNodeCallsActive             OBJECT IDENTIFIER ::= { kpbxNodeCalls 1 }
kpbxNodeCallsActiveAllTenants   OBJECT IDENTIFIER ::= { kpbxNodeCallsActive 1 }

-- kpbxNodeCurrentCallsAllTotal
kpbxNodeCurrentCallsAllTotal OBJECT-TYPE
	SYNTAX		Unsigned32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The total number of current calls for all tenants."
	::= { kpbxNodeCallsActiveAllTenants 1 }

-- kpbxNodeCurrentCallsAllIn
kpbxNodeCurrentCallsAllIn OBJECT-TYPE
	SYNTAX		Unsigned32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The total number of current incoming calls for all tenants."
	::= { kpbxNodeCallsActiveAllTenants 2 }

-- kpbxNodeCurrentCallsAllOut
kpbxNodeCurrentCallsAllOut OBJECT-TYPE
	SYNTAX		Unsigned32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The total number of current outgoing calls for all tenants."
	::= { kpbxNodeCallsActiveAllTenants 3 }

-- kpbxNodeCurrentCallsAllLocal
kpbxNodeCurrentCallsAllLocal OBJECT-TYPE
	SYNTAX		Unsigned32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The total number of current local calls for all tenants."
	::= { kpbxNodeCallsActiveAllTenants 4 }

--
-- kpbxNodeCallsProcessed
--
kpbxNodeCallsProcessed              OBJECT IDENTIFIER ::= { kpbxNodeCalls 2 }
kpbxNodeCallsProcessedAllTenants    OBJECT IDENTIFIER ::= { kpbxNodeCallsProcessed 1 }

-- kpbxNodeProcessedCallsAllTotal
kpbxNodeProcessedCallsAllTotal OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The total number of processed calls for all tenants from last boot."
	::= { kpbxNodeCallsProcessedAllTenants 1 }

END
Estratto da "https://www.kalliope.com/wiki/index.php?title=AdminGuide:Service:SNMP/en&oldid=9017"