Differenze tra le versioni di "AdminGuide:GettingStarted:MiniLite/en"
Jump to navigation
Jump to search
(Aggiornamento come da nuova versione della pagina di origine) |
|||
| Riga 21: | Riga 21: | ||
==Installation== | ==Installation== | ||
* Connect KalliopePBX to your network using the eth0 interface. | * Connect KalliopePBX to your network using the eth0 interface. | ||
* Optional: connect KalliopePBX's COM1 serial port to your PC using a serial cable (not included - settings: 115200 8/n/1). | * Optional: connect KalliopePBX's COM1 serial port to your PC using a serial cable (not included - settings: 115200 8/n/1). | ||
| Riga 27: | Riga 26: | ||
* Open http://192.168.0.100:10080 on your browser to register. KalliopePBX will require access to https://license.kalliopepbx.it; the network configuration can be edited from the "settings" menu. | * Open http://192.168.0.100:10080 on your browser to register. KalliopePBX will require access to https://license.kalliopepbx.it; the network configuration can be edited from the "settings" menu. | ||
* After registering, choose and install the desired firmware from those available. KalliopePBX will require access to the address https://updates.kalliopepbx.it. The process may take a few minutes, depending on the size of the firmware and your own network speed. | * After registering, choose and install the desired firmware from those available. KalliopePBX will require access to the address https://updates.kalliopepbx.it. The process may take a few minutes, depending on the size of the firmware and your own network speed. | ||
* Follow the firmware installation progress; once it's over, restart KalliopePBX and access the configuration interface by opening http://<Configured_ip> (default http port 80) on your browser. | * Follow the firmware installation progress; once it's over, restart KalliopePBX and access the configuration interface by opening http://<Configured_ip> (default http port 80) on your browser. The default credentials are admin/admin. | ||
Versione delle 14:16, 27 lug 2018
Return to AdminGuide:GettingStarted
Port description
- COM1 (Console 115200 8/n/1)
- Gigabit Ethernet (eth0)
- Gigabit Ethernet (eth1)
- Gigabit Ethernet (eth2)
- USB 2.0
- Power (12v, 1A)
Installation
- Connect KalliopePBX to your network using the eth0 interface.
- Optional: connect KalliopePBX's COM1 serial port to your PC using a serial cable (not included - settings: 115200 8/n/1).
- Connect the included power cord to KalliopePBX and plug it into a power socket (100-240V AC, 50-60 Hz). KalliopePBX will boot automatically.
- Open http://192.168.0.100:10080 on your browser to register. KalliopePBX will require access to https://license.kalliopepbx.it; the network configuration can be edited from the "settings" menu.
- After registering, choose and install the desired firmware from those available. KalliopePBX will require access to the address https://updates.kalliopepbx.it. The process may take a few minutes, depending on the size of the firmware and your own network speed.
- Follow the firmware installation progress; once it's over, restart KalliopePBX and access the configuration interface by opening http://<Configured_ip> (default http port 80) on your browser. The default credentials are admin/admin.