Kalliope Call Center/en

Introduction

Kalliope Call Center is an optional KalliopePBX module that adds advanced features specially designed for call centers.

The main features included in Kalliope Call Center are

• Kalliope Supervisor Panel
• Call Center CDR
• Call Tagging
• Spy/Whisper/Barge services
• Queue position reservation and automatic callback

This page describes the Kalliope Supervisor Panel. For further information on the other features included in Kalliope Call Center, see the user manual.

Kalliope Supervisor Panel

The Kalliope Supervisor Panel software lets a user access queue statistics based on their role, monitor and change the state of the operators, and manage dynamic operators.

When first opening the application, you will need to go to the Settings page and insert the credentials of the extension. The system will automatically check for the required Call Center license and the role of the user (supervisor or operator).

N.B.: Installation does not prompt for any activation keys. Instead, the application will automatically check for the correct license on KalliopePBX every time it is opened.

Menu bar

The menu bar lets you select the Settings sub-menu.

The Settings menu contains the following items:

• Connect to KalliopePBX: start the connection with KalliopePBX
• Disconnect from KalliopePBX: interrupt the connection with KalliopePBX
• Fullscreen: view the application in fullscreen mode (shortcut: F11)
• Settings: opens the Settings page
• Quit: close the application (shortcut: CTRL+Q)

Settings page

From the menu bar you can open the configuration page, which consists of two parts: Credentials and Customize logo.

Credentials

This section lets you configure the following parameters:

• KalliopePBX IP address: the IP address of the KalliopePBX the application should connect to
• Username: the name assigned to the user
• Password: the password assigned to the user

N.B.: The username and password are the same as the credentials on the System -> KCTI/Web users page on KalliopePBX V4.

Customize logo

Personalizzazione logo

This section lets you upload an image file containing the custom logo that will be displayed in the main screen of the application instead of the KalliopeCC logo.

Main screen

The main Kalliope Supervisor Panel screen is divided in thee sections:

• Logo bar
• Statistics panel
• Operator panel

Main screen

Main screen

The main Kalliope Supervisor Panel screen is divided in thee sections:

• Logo bar
• Statistics panel
• Operator panel

Main screen

The first has a set size and cannot be hidden, while the other two can be expanded or reduced and can be set to completely fill the main screen. This can be useful if, for example, you wish to only view aggregated data without seeing the names of every operator.

The main screen changes depending on whether the logged-in user is a supervisor or an operator. A supervisor will see information on all active queues on the PBX and will have permissions to pause and assign queues to every operator. An operator will only see the queues and statistics that concern them.

The three sections are detailed below.

Logo bar

As previously explained, this section can be partly customized by changing the logo from the Settings page.

The logo bar displays the following information:

• The KalliopeCCenter logo or the custom logo uploaded by the user
• Date and time
• The total number of calls in every queue
• Interval of time selection: from the drop-down menu you can choose the interval of time for which to display aggregated data in the section below

Statistics panel

Pannello statistiche

This columns of this table display information on each active queue on the PBX.

The rows display data on:

• Users in the queue: dynamically updates when a user enters or exits the queue
• Oldest call in the queue: the time, in seconds, that the oldest call has been in the queue;
• Average waiting time: always refers to the last hour regardless of the selected interval of time and updates every 5 minutes by automatically downloading and analyzing the month's CDR;
• Active operators: reports the state of the operators in real-time; the first number is the number of active registered operators (green BLF), the second the number of busy registered operators (red BLF), the third the number of paused registered operators (orange BLF), and the fourth the number of operators whose state is unavailable (gray BLF);
• Missed calls (in the selected interval): varies depending on the interval of time selected in the drop-down menu;
• Answered calls (in the selected interval): varies depending on the interval of time selected in the drop-down menu;
• Average waiting time (in the selected interval): varies depending on the interval of time selected in the drop-down menu;
• Average conversation time (in the selected interval): varies depending on the interval of time selected in the drop-down menu;

Operator panel

The first column shows the registered operators on the PBX, the second the corresponding BLF state, and the remaining ones correspond to each queue, as with the statistics panel.

Each row corresponds to a single operator and their data for each queue they are statically or dynamically assigned to. This table gives an overview of the situation across all queues.

Each cell corresponding to a specific operator and a specific queue gives the supervisor important information.

The color of the cell indicates the state of the operator. If the operator is active, the cell is green; if the operator is paused, the cell is orange. Similarly, the button will change between Pause and Reactivate.

N.B.: Operators are only able to change their own status, while supervisors can act on all operators.

Each cell also displays the following information:

• The number of answered calls in the selected interval of time, on the top right;
• Whether the operator is static or dynamic on that queue (in the latter case, a "D" will be displayed next to the number of answered calls);
• Time operating on the queue: the amount of time since the status was last changed from active to pause or vice versa;
• Time of the last served call.

Aggiunta operatori dinamici

Un operatore dinamico è un utente assegnato temporaneamente dal Supervisor, in caso di necessità, ad una o più code.
A differenza degli operatori statici, gli operatori dinamici non sono assegnati alle code a livello di centrale ma solo a livello dell’applicativo.
Un operatore dinamico può essere sia un operatore già assegnato ad una coda, che un qualsiasi interno registrato sul centralino e non assegnato a nessuna coda.
Nel primo caso, il Supervisor può aggiungere l’operatore dinamico cliccando con il tasto destro sulla cella vuota in corrispondenza della coda interessata e selezionando la voce Aggiungi dal menu contestuale.
Allo stesso modo, cliccando con il tasto destro sulla cella interessata, il Supervisor può rimuovere l’operatore dinamico dalla coda.

Nel secondo caso, l’aggiunta avviene utilizzando i menu a tendina che si trovano nell’ultima riga in basso in corrispondenza di ogni coda.
Tramite questi menu è possibile scegliere un interno registrato sul centralino e non ancora assegnato a nessuna coda.
Cliccando sul pulsante Aggiungi operatore, l’interno selezionato viene assegnato come operatore dinamico a quella specifica coda, e compare una nuova riga con le informazioni relative al nuovo operatore.

Così come per gli altri operatori dinamici, è sufficiente cliccare con il tasto destro sulla corrispondente cella per rimuovere l’interno da quella coda.