Differenze tra le versioni di "AdminGuide:GettingStarted:VM:Proxmox/en"
(Creata pagina con "After this, you can operate as with other VMs, i.e. by accessing with manager/manager credentials, and a wizard will let you configure the network settings.") |
(Creata pagina con "Once the VM is connected to the network, you can activate and configure it through the web interface (initially on port 10080, and after installing the phone firmware on the s...") |
||
| Riga 29: | Riga 29: | ||
After this, you can operate as with other VMs, i.e. by accessing with manager/manager credentials, and a wizard will let you configure the network settings. | After this, you can operate as with other VMs, i.e. by accessing with manager/manager credentials, and a wizard will let you configure the network settings. | ||
Once the VM is connected to the network, you can activate and configure it through the web interface (initially on port 10080, and after installing the phone firmware on the standard port 80). | |||
E' necessario che la VM abbia la raggiungibilità in HTTPS dei nostri server di licenza e di aggiornamenti (license.kalliopepbx.it e updates.kalliopepbx.it) che attualmente risolvono entrambi l'IP 77.72.27.4 | E' necessario che la VM abbia la raggiungibilità in HTTPS dei nostri server di licenza e di aggiornamenti (license.kalliopepbx.it e updates.kalliopepbx.it) che attualmente risolvono entrambi l'IP 77.72.27.4 | ||
Versione delle 09:54, 21 feb 2018
Return to AdminGuide:GettingStarted:VM
The KalliopePBX image file for Proxmox-VE (4.4) environment can be downloaded at the following link:
vzdump-qemu-200-2017_06_28-10_06_39.vma.lzo :
https://areaclienti.vianova.it/drive/download/0hh0XCroc9AOsFzt/
vzdump-qemu-200-2017_06_28-10_06_39.log :
https://areaclienti.vianova.it/drive/download/vcZYocwlyIeqoHHd/
The following is the procedure for restoring in a Proxmox environment:
1. Copy the two files to the /var/lib/vz/dump folder of the host machine, without renaming them.
2. Execute the command
# qmrestore /var/lib/vz/dump/Kalliope...vma.lzo <nnn>
where <nnn> is the ID you wish to assign to the VM (it must not be assigned to any other VMs). This step can be performed through the Proxmox GUI.
The VM is now operational and you can boot it and access the console to configure the network address.
N.B.: before booting the machine, you must edit the VM settings to enable the "KVM Hardware acceleration" flag, otherwise performance will be slow.
After this, you can operate as with other VMs, i.e. by accessing with manager/manager credentials, and a wizard will let you configure the network settings.
Once the VM is connected to the network, you can activate and configure it through the web interface (initially on port 10080, and after installing the phone firmware on the standard port 80).
E' necessario che la VM abbia la raggiungibilità in HTTPS dei nostri server di licenza e di aggiornamenti (license.kalliopepbx.it e updates.kalliopepbx.it) che attualmente risolvono entrambi l'IP 77.72.27.4