Differenze tra le versioni di "AdminGuide:Service:HotDesking/en"

Versione attuale delle 13:15, 20 set 2022

Altre lingue:

English
italiano

Description

The Hot Desking service allows the telephone identity of a KalliopePBX user to be linked to any enabled phone. This way the user can receive calls to their extension and keep their phone properties (such as calling number, routing rules, failover policies) and a single call record regardless of the terminal they use.

The service is accessed by logging in with the service PIN of the user.

If a user is already logged into the Hot Desking service on another terminal, the other terminal will be immediately disconnected, while all terminals that are statically linked to the user will remain registered to them.

Inbound calls will therefore be simultaneously presented to all static terminals as well as the single Hot Desking terminal.

The Busy Level and number of concurrent calls for each user is specified in the Extensions page.

A user can log into the Hot Desking service by calling their extension from a terminal that is not linked to any extension. KalliopePBX will then ask for their password and the user must input their service PIN followed by # (if # is not pressed the system will still accept the PIN 5 seconds after the last number has been dialed). The system will confirm the login by playing the "Logged in" audio file. The phone will be dynamically reconfigured and the display will show the user information.

The user can log out by dialing the Hot Desking service logout code (by default *400).

Requirements

To enable the Hot Desking service on a terminal, the configuration must be internally handled through auto provisioning, and the terminal must support configuration updates through SIP NOTIFY.

Many phone manufacturers (such as Snom, Yealink, Gigaset, Polycom, etc.) allow this.

For a full list of certified phones and the relative firmware versions, please see the Interoperability section.

Configuration

The Hot Desking configuration involves several different parts of the KalliopePBX web GUI; the main configuration is done through the Hot Desking page reachable from the PBX applications page, but certain settings will need to be edited in the Extensions page and the numbering plan.

Before configuring the service you must first insert the device (including model, MAC address, and IP address) in the provisioning page without linking it to a SIP account. You can omit the template, as it will be configured in the Hot Desking page.

From the Hot Desking page you can set the desired devices (among those defined in the provisioning page but not linked to a SIP account) to Hot Desking mode. The system will automatically generate a SIP account (hotdesk-<mac>) used in the configuration of the terminal in order to allow the call required to log in.

For each Hot Desking enabled extension, the corresponding flag must be enabled (this can be done via template). A dedicated SIP account will be automatically generated (hotdesk-<extension>); this will be used to generate the configuration of the terminal used after login. This account must also be linked to a SIP account template.

N.B.: The Hot Desking flag and the SIP account template are configuration parameters present in the extension template, and they can be overwritten.

Hot Desking page description

The configurable parameters needed to enable a device to use the Hot Desking service are:

provisioning device: the terminal that needs to be enabled from those defined in the provisioning page;
provisioning template: the template to be used to generate the provisioning file for the terminal;
SIP account template: the template used for the automatically generated SIP account and for the configuration of the terminal.

Enabling extensions

Devices can be enabled to use the Hot Desking service through the extension template, enabling all extensions that use the template, or by overriding the values from the assigned template.

The configurable parameters needed to enable a device to use the Hot Desking service from the template page are:

The flag that enables the use of hot desking;
The SIP template to assign to the hot desk account: the SIP template for the automatically generated SIP account, used after a user logs into the Hot Desking terminal.

These parameters are also present in the Extensions page with their template override flags.

Enabling the service

In order to use the service, Hot Desking must be enabled in the numbering plan.

Interoperability

The service has been tested with SNOM and Yealink terminals.

Brand	Series/Model	Firmware
Snom	D3x5	8.9.3.40
Snom	D745	8.9.3.40
Snom	D765 / D725 / D715 / D710	8.7.5.35
Snom	3xx	8.7.5.35
Snom	7xx	8.7.5.35
Snom	8xx	8.7.5.35
Yealink	T19P / T20P / T21P / T22P / T26P / T28P / T32G / T38G / VP530	v70
Yealink	T19P E2 / T21P E2 / T23P / T23G / T27P / T29G / T40P / T41P / T42G / T46G / T48G / VP-T49G	v80

Other models are being tested. Should they prove to be compatible, they will be added to the above table.

In order to prevent Yealink phones from rebooting after reprogramming, you will need to add the following line to the configuration template:

sip.notify_reboot_enable = 0

@@ Riga 1: / Riga 1: @@
 <languages />
+Return to [[AdminGuide:Service/en|AdminGuide:Service]]
+<div class="noutonum" style="float: right">__TOC__</div>
 ==Description==
 The Hot Desking service allows the telephone identity of a KalliopePBX user to be linked to any enabled phone. This way the user can receive calls to their extension and keep their phone properties (such as calling number, routing rules, failover policies) and a single call record regardless of the terminal they use.
@@ Riga 9: / Riga 13: @@
 Inbound calls will therefore be simultaneously presented to all static terminals as well as the single Hot Desking terminal.
-The Busy Level and number of simultaneous calls for each user is specified in the [[AdminGuide:GUI:OperatingMenu:Extensions/en|Extensions]] page.
+The Busy Level and number of concurrent calls for each user is specified in the [[AdminGuide:BasicConcepts:Extensions_and_SIP_accounts/en#Extensions_configuration|Extensions]] page.
 A user can log into the Hot Desking service by calling their extension from a terminal that is not linked to any extension. KalliopePBX will then ask for their password and the user must input their service PIN followed by # (if # is not pressed the system will still accept the PIN 5 seconds after the last number has been dialed). The system will confirm the login by playing the "Logged in" audio file. The phone will be dynamically reconfigured and the display will show the user information.
@@ Riga 23: / Riga 27: @@
 ==Configuration==
-The Hot Desking configuration involves several different parts of the KalliopePBX web GUI; the main configuration is done through the Hot Desking page reachable from the PBX applications page, but certain settings will need to be edited in the [[AdminGuide:GUI:OperatingMenu:Extensions/en|Extensions]] page and the [[AdminGuide:GUI:OperatingMenu:NumberingPlan/en|numbering plan]].
+[[File:App pbx, hot desking.png|destra|300px]]
-Before configuring the service you must first insert the device (including model, MAC address, and IP address) in the provisioning page without linking it to a SIP account. You can omit the template, as it will be configured in the Hot Dasking page.
+The Hot Desking configuration involves several different parts of the KalliopePBX web GUI; the main configuration is done through the Hot Desking page reachable from the PBX applications page, but certain settings will need to be edited in the [[AdminGuide:BasicConcepts:Extensions_and_SIP_accounts/en#Extensions_configuration|Extensions]] page and the [[AdminGuide:Service:NumberingPlan/en|numbering plan]].
+Before configuring the service you must first insert the device (including model, MAC address, and IP address) in the provisioning page without linking it to a SIP account. You can omit the template, as it will be configured in the Hot Desking page.
 From the Hot Desking page you can set the desired devices (among those defined in the provisioning page but not linked to a SIP account) to Hot Desking mode. The system will automatically generate a SIP account (hotdesk-<mac>) used in the configuration of the terminal in order to allow the call required to log in.
@@ Riga 36: / Riga 42: @@
 The configurable parameters needed to enable a device to use the Hot Desking service are:
-*provisioning device: the terminal that needs to be enabled from those defined in the provisioning page;
+*'''provisioning device''': the terminal that needs to be enabled from those defined in the provisioning page;
-*provisioning template: the template to be used to generate the provisioning file for the terminal;
+*'''provisioning template''': the template to be used to generate the provisioning file for the terminal;
-*SIP account template: the template used for the automatically generated SIP account and for the configuration of the terminal.
+*'''SIP account template''': the template used for the automatically generated SIP account and for the configuration of the terminal.
 ===Enabling extensions===
 Devices can be enabled to use the Hot Desking service through the extension template, enabling all extensions that use the template, or by overriding the values from the assigned template.
-I parametri di configurazione per l’abilitazione all’utilizzo dell’Hot Desking nel pannello dei template degli interni sono:
+The configurable parameters needed to enable a device to use the Hot Desking service from the template page are:
-*Il flag abilita all'utilizzo dell'hot desking: autoesplicativo
-*Il template SIP da assegnare all'account hot desk: il template SIP da utilizzare per l’account SIP generato automaticamente ed utilizzato in seguito al login dell’utente sul terminale di Hot Desking.
-Gli stessi due parametri sono presenti nel pannello degli interni con i relativi flag di override rispetto a quanto configurato nel template.
+*The flag that enables the use of hot desking;
+*The SIP template to assign to the hot desk account: the SIP template for the automatically generated SIP account, used after a user logs into the Hot Desking terminal.
-===Abilitazione del servizio===
+These parameters are also present in the Extensions page with their template override flags.
-Per poter utilizzare la funzionalità è necessario abilitare il servizio Hot Desking dal pannello [[AdminGuide:GUI:OperatingMenu:NumberingPlan|Piano di numerazione]].
-==Interoperabilità con dispositivi di terze parti==
+===Enabling the service===
-Il servizio è stato testato con terminali SNOM e Yealink secondo la seguente tabella di compatibilità:
+In order to use the service, Hot Desking must be enabled in the  [[AdminGuide:Service:NumberingPlan/en|numbering plan]].
+==Interoperability==
+The service has been tested with SNOM and Yealink terminals.
 {| class="wikitable"
 |-
-! Marca !! Serie/Modello !! Firmware
+! Brand !! Series/Model !! Firmware
 |-
 | Snom || D3x5 || 8.9.3.40
@@ Riga 76: / Riga 83: @@
 |}
-Altri modelli sono in fase di testing e qualora risultassero compatibili verranno aggiunti alla tabella precedente.<br>
+Other models are being tested. Should they prove to be compatible, they will be added to the above table.
+In order to prevent Yealink phones from rebooting after reprogramming, you will need to add the following line to the configuration template:
-Per i telefoni Yealink, al fine di evitare il reboot del telefono al momento della riprogrammazione, è necessario aggiungere la seguente riga di configurazione al template:<br>
 <code>sip.notify_reboot_enable = 0