AdminGuide:Service:Call Pickup/en - Cronologia

Troccoli il 07:50, 20 apr 2022

2022-04-20T07:50:38Z

← Versione meno recente		Versione delle 07:50, 20 apr 2022
Riga 25:		Riga 25:

	===Configuration===		===Configuration===
	The service can be enabled/disabled in the PBX -> [[AdminGuide:~~GUI:OperatingMenu~~:NumberingPlan/en\|Numbering plan]] page.		The service can be enabled/disabled in the PBX -> [[AdminGuide:Service:NumberingPlan/en\|Numbering plan]] page.

	The service codes can be changed in the PBX -> [[AdminGuide:~~GUI:OperatingMenu~~:NumberingPlan/en\|Numbering plan]] page.		The service codes can be changed in the PBX -> [[AdminGuide:Service:NumberingPlan/en\|Numbering plan]] page.

	===Interoperability===		===Interoperability===

Silvia il 09:50, 3 mag 2018

2018-05-03T09:50:04Z

← Versione meno recente		Versione delle 09:50, 3 mag 2018
Riga 37:		Riga 37:
	This operation is normally executed by configuring a BLF-type function key.		This operation is normally executed by configuring a BLF-type function key.

	Apart from monitoring the state of the extension, with many phones it is possible to pick up the call ~~through~~ the same key. In this case, the pickup code must be specified.		Apart from monitoring the state of the extension, with many phones it is possible to pick up the call with the same key. In this case, the pickup code must be specified.

	===Examples===		===Examples===

Silvia: Creata pagina con "Return to AdminGuide:Service"

2018-04-17T09:01:33Z

Creata pagina con "Return to AdminGuide:Service"

← Versione meno recente		Versione delle 09:01, 17 apr 2018
Riga 1:		Riga 1:
	<languages />		<languages />
			Return to [[AdminGuide:Service/en\|AdminGuide:Service]]


	<div class="noutonum" style="float: right">__TOC__</div>		<div class="noutonum" style="float: right">__TOC__</div>
	==Call Pickup==		==Call Pickup==

Silvia: Creata pagina con "For pickup with invite, you need to replace the direct pickup code (**) with the pickup with invite code (#*)."

2018-02-26T10:15:25Z

Creata pagina con "For pickup with invite, you need to replace the direct pickup code (**) with the pickup with invite code (#*)."

← Versione meno recente		Versione delle 10:15, 26 feb 2018
Riga 87:		Riga 87:
	</code>		</code>

	~~Nel caso si intenda configurare il prelievo con invito è necessario sostituire il codice di prelievo diretto~~ (*) ~~con quello di prelievo con invito~~ (#).		For pickup with invite, you need to replace the direct pickup code (*) with the pickup with invite code (#).

Silvia: Creata pagina con "Example:"

2018-02-26T10:15:06Z

Creata pagina con "Example:"

← Versione meno recente		Versione delle 10:15, 26 feb 2018
Riga 78:		Riga 78:
	where ''%%id%%'' is the ID of the key to configure and ''%%line_id%%'' is the ID of the corresponding account (1 if the account is the only one on the phone).		where ''%%id%%'' is the ID of the key to configure and ''%%line_id%%'' is the ID of the corresponding account (1 if the account is the only one on the phone).

	~~Esempio~~:		Example:

	<code>		<code>

Silvia: Creata pagina con "where ''%%id%%'' is the ID of the key to configure and ''%%line_id%%'' is the ID of the corresponding account (1 if the account is the only one on the phone)."

2018-02-26T10:14:54Z

Creata pagina con "where ''%%id%%'' is the ID of the key to configure and ''%%line_id%%'' is the ID of the corresponding account (1 if the account is the only one on the phone)."

← Versione meno recente		Versione delle 10:14, 26 feb 2018
Riga 76:		Riga 76:
	</code>		</code>

	~~Dove '''~~''%%id%%''~~''' è l’identificativo del tasto da configurare e '''~~''%%line_id%%''~~''' è l’identificativo dell’account associato il valore è~~ 1 ~~se sul telefono è presente un solo~~ account).		where ''%%id%%'' is the ID of the key to configure and ''%%line_id%%'' is the ID of the corresponding account (1 if the account is the only one on the phone).

	Esempio:		Esempio:

Silvia: Creata pagina con "Or you can directly edit the configuration file or the template: `memorykey.%%id%%.line=%%line_id%% memorykey.%%id%%.value= memorykey.%%id%%.type=16<..."`


2018-02-26T10:14:44Z
Creata pagina con "Or you can directly edit the configuration file or the template:  <code> memorykey.%%id%%.line=%%line_id%%<br> memorykey.%%id%%.value=<extension><br> memorykey.%%id%%.type=16<..."

				
				
				
				
				
				← Versione meno recente
				Versione delle 10:14, 26 feb 2018
				
Riga 67:
Riga 67:
</code> </code>



Oppure modificando direttamente il file di configurazione o il template in questo modo:<br> Or you can directly edit the configuration file or the template:
 
<code> <code>
memorykey.%%id%%.line=%%line_id%%<br> memorykey.%%id%%.line=%%line_id%%<br>
memorykey.%%id%%.value=<interno><br> memorykey.%%id%%.value=<extension><br>
memorykey.%%id%%.type=16<br> memorykey.%%id%%.type=16<br>
memorykey.%%id%%.pickup_value=** memorykey.%%id%%.pickup_value=**



Silvia: Creata pagina con "====On YEALINK==== Through the web GUI, you can configure DSS keys with:   Type: BLF
 Value: 
 Line: The line associated with the account (Line 1 if the..."

2018-02-26T10:14:33Z
Creata pagina con "====On YEALINK==== Through the web GUI, you can configure DSS keys with:  <code> Type: BLF<br> Value: <extension><br> Line: The line associated with the account (Line 1 if the..."

				
				
				
				
				
				← Versione meno recente
				Versione delle 10:14, 26 feb 2018
				
Riga 57:
Riga 57:
<code><fkey idx="0" context="1" label="EXTENSION103" perm="">blf sip'':''103@192.168.23.190;user=phone'''|'''**</fkey></code> <code><fkey idx="0" context="1" label="EXTENSION103" perm="">blf sip'':''103@192.168.23.190;user=phone'''|'''**</fkey></code>



'''Su YEALINK'''<br> ====On YEALINK====
Operando tramite la web gui di configurazione configurare DSS Key con<br> Through the web GUI, you can configure DSS keys with:
 
<code> <code>
Type: BLF<br> Type: BLF<br>
Value: <interno><br> Value: <extension><br>
Line: La linea associata all’account che stiamo utilizzando (Line 1 se sul telefono è presente un solo account)<br> Line: The line associated with the account (Line 1 if the account is the only one on the phone)<br>
Extension: ** Extension: **
</code> </code>



Silvia: Creata pagina con "Example:  blf sip'':''103@192.168.23.190;user=phone'''|'''**"
2018-02-26T10:14:05Z
Creata pagina con "Example:  <code><fkey idx="0" context="1" label="EXTENSION103" perm="">blf sip'':''103@192.168.23.190;user=phone'''|'''**</fkey></code>"

				
				
				
				
				
				← Versione meno recente
				Versione delle 10:14, 26 feb 2018
				
Riga 53:
Riga 53:
where ''%%id%%'' is the ID of the key to configure and ''%%line_id%%'' is the ID of the corresponding account (1 if the account is the only one on the phone). where ''%%id%%'' is the ID of the key to configure and ''%%line_id%%'' is the ID of the corresponding account (1 if the account is the only one on the phone).



Esempio:<br> Example:
<code><fkey idx="0" context="1" label="INTERNO103" perm="">blf sip'':''103@192.168.23.190;user=phone'''|'''**</fkey></code>  
<code><fkey idx="0" context="1" label="EXTENSION103" perm="">blf sip'':''103@192.168.23.190;user=phone'''|'''**</fkey></code>



'''Su YEALINK'''<br> '''Su YEALINK'''<br>



Silvia: Creata pagina con "Or you can directly edit the configuration file or the template:  blf sip:@%%KPBX_IP_ADDRESS%%;user=..."

2018-02-26T10:13:45Z
Creata pagina con "Or you can directly edit the configuration file or the template:  <code><fkey idx="%%id%%" context="%%line_id%%" label="" perm="">blf sip:<extension>@%%KPBX_IP_ADDRESS%%;user=..."

				
				
				
				
				
				← Versione meno recente
				Versione delle 10:13, 26 feb 2018
				
Riga 47:
Riga 47:
</code> </code>



In alternativa modificando direttamente il file di configurazione o il template in questo modo: <br> Or you can directly edit the configuration file or the template:
<code><fkey idx="%%id%%" context="%%line_id%%" label="" perm="">blf sip:<interno>@%%KPBX_IP_ADDRESS%%;user=phone|**</fkey></code><br>  
dove '''''%%id%%''''' è l’identificativo del tasto da configurare e '''''%%line_id%%''''' è l’identificativo dell’account associato (il valore è 1 se sul telefono è presente un solo account). <code><fkey idx="%%id%%" context="%%line_id%%" label="" perm="">blf sip:<extension>@%%KPBX_IP_ADDRESS%%;user=phone|**</fkey></code>
 
where ''%%id%%'' is the ID of the key to configure and ''%%line_id%%'' is the ID of the corresponding account (1 if the account is the only one on the phone).



Esempio:<br> Esempio:<br>

AdminGuide:Service:Call Pickup/en - Cronologia

Troccoli il 07:50, 20 apr 2022

Silvia il 09:50, 3 mag 2018

Silvia: Creata pagina con "Return to AdminGuide:Service"

Silvia: Creata pagina con "For pickup with invite, you need to replace the direct pickup code (**) with the pickup with invite code (#*)."

Silvia: Creata pagina con "Example:"

Silvia: Creata pagina con "where ''%%id%%'' is the ID of the key to configure and ''%%line_id%%'' is the ID of the corresponding account (1 if the account is the only one on the phone)."

Silvia: Creata pagina con "Or you can directly edit the configuration file or the template: `memorykey.%%id%%.line=%%line_id%% memorykey.%%id%%.value= memorykey.%%id%%.type=16<..."`

Silvia: Creata pagina con "====On YEALINK==== Through the web GUI, you can configure DSS keys with: `Type: BLF Value: Line: The line associated with the account (Line 1 if the..."`

Silvia: Creata pagina con "Example: `blf sip'':''103@192.168.23.190;user=phone'''|'''**`"

Silvia: Creata pagina con "Or you can directly edit the configuration file or the template: `blf sip:@%%KPBX_IP_ADDRESS%%;user=..."`

← Versione meno recente		Versione delle 10:14, 26 feb 2018
Riga 67:		Riga 67:
	</code>		</code>

	~~Oppure modificando direttamente il~~ file ~~di configurazione o il~~ template ~~in questo modo~~:~~<br>~~		Or you can directly edit the configuration file or the template:

	<code>		<code>
	memorykey.%%id%%.line=%%line_id%%<br>		memorykey.%%id%%.line=%%line_id%%<br>
	memorykey.%%id%%.value=<~~interno~~><br>		memorykey.%%id%%.value=<extension><br>
	memorykey.%%id%%.type=16<br>		memorykey.%%id%%.type=16<br>
	memorykey.%%id%%.pickup_value=**		memorykey.%%id%%.pickup_value=**

← Versione meno recente		Versione delle 10:14, 26 feb 2018
Riga 57:		Riga 57:
	<code><fkey idx="0" context="1" label="EXTENSION103" perm="">blf sip'':''103@192.168.23.190;user=phone'''\|'''**</fkey></code>		<code><fkey idx="0" context="1" label="EXTENSION103" perm="">blf sip'':''103@192.168.23.190;user=phone'''\|'''**</fkey></code>

	~~'''Su~~ YEALINK~~'''<br>~~		====On YEALINK====
	~~Operando tramite la~~ web ~~gui di configurazione configurare~~ DSS ~~Key con<br>~~		Through the web GUI, you can configure DSS keys with:

	<code>		<code>
	Type: BLF<br>		Type: BLF<br>
	Value: <~~interno~~><br>		Value: <extension><br>
	Line: ~~La linea associata all’account che stiamo utilizzando~~ (Line 1 ~~se sul telefono è presente un solo~~ account)<br>		Line: The line associated with the account (Line 1 if the account is the only one on the phone)<br>
	Extension: **		Extension: **
	</code>		</code>

← Versione meno recente		Versione delle 10:14, 26 feb 2018
Riga 53:		Riga 53:
	where ''%%id%%'' is the ID of the key to configure and ''%%line_id%%'' is the ID of the corresponding account (1 if the account is the only one on the phone).		where ''%%id%%'' is the ID of the key to configure and ''%%line_id%%'' is the ID of the corresponding account (1 if the account is the only one on the phone).

	~~Esempio~~:~~<br>~~		Example:
	<code><fkey idx="0" context="1" label="~~INTERNO103~~" perm="">blf sip'':''103@192.168.23.190;user=phone'''\|'''**</fkey></code>
			<code><fkey idx="0" context="1" label="EXTENSION103" perm="">blf sip'':''103@192.168.23.190;user=phone'''\|'''**</fkey></code>

	'''Su YEALINK'''<br>		'''Su YEALINK'''<br>

← Versione meno recente		Versione delle 10:13, 26 feb 2018
Riga 47:		Riga 47:
	</code>		</code>

	~~In alternativa modificando direttamente il~~ file ~~di configurazione o il~~ template ~~in questo modo~~: ~~<br>~~		Or you can directly edit the configuration file or the template:
	<code><fkey idx="%%id%%" context="%%line_id%%" label="" perm="">blf sip:<~~interno~~>@%%KPBX_IP_ADDRESS%%;user=phone\|**</fkey></code>~~<br>~~
	~~dove '''~~''%%id%%''~~''' è l’identificativo del tasto da configurare e '''~~''%%line_id%%''~~''' è l’identificativo dell’account associato~~ (~~il valore è~~ 1 ~~se sul telefono è presente un solo~~ account).		<code><fkey idx="%%id%%" context="%%line_id%%" label="" perm="">blf sip:<extension>@%%KPBX_IP_ADDRESS%%;user=phone\|**</fkey></code>

			where ''%%id%%'' is the ID of the key to configure and ''%%line_id%%'' is the ID of the corresponding account (1 if the account is the only one on the phone).

	Esempio:<br>		Esempio:<br>

AdminGuide:Service:Call Pickup/en - Cronologia

Troccoli il 07:50, 20 apr 2022

Silvia il 09:50, 3 mag 2018

Silvia: Creata pagina con "Return to AdminGuide:Service"

Silvia: Creata pagina con "For pickup with invite, you need to replace the direct pickup code (**) with the pickup with invite code (#*)."

Silvia: Creata pagina con "Example:"

Silvia: Creata pagina con "where ''%%id%%'' is the ID of the key to configure and ''%%line_id%%'' is the ID of the corresponding account (1 if the account is the only one on the phone)."

Silvia: Creata pagina con "Or you can directly edit the configuration file or the template: memorykey.%%id%%.line=%%line_id%% memorykey.%%id%%.value= memorykey.%%id%%.type=16<..."

Silvia: Creata pagina con "====On YEALINK==== Through the web GUI, you can configure DSS keys with: Type: BLF Value: Line: The line associated with the account (Line 1 if the..."

Silvia: Creata pagina con "Example: blf sip'':''103@192.168.23.190;user=phone'''|'''**"

Silvia: Creata pagina con "Or you can directly edit the configuration file or the template: blf sip:@%%KPBX_IP_ADDRESS%%;user=..."

Silvia: Creata pagina con "Or you can directly edit the configuration file or the template: `memorykey.%%id%%.line=%%line_id%% memorykey.%%id%%.value= memorykey.%%id%%.type=16<..."`

Silvia: Creata pagina con "====On YEALINK==== Through the web GUI, you can configure DSS keys with: `Type: BLF Value: Line: The line associated with the account (Line 1 if the..."`

Silvia: Creata pagina con "Example: `blf sip'':''103@192.168.23.190;user=phone'''|'''**`"

Silvia: Creata pagina con "Or you can directly edit the configuration file or the template: `blf sip:@%%KPBX_IP_ADDRESS%%;user=..."`