AdminGuide:GettingStarted:VM:VMWare/en - Cronologia

FuzzyBot: Aggiornamento come da nuova versione della pagina di origine

2022-02-16T14:32:45Z

Aggiornamento come da nuova versione della pagina di origine

← Versione meno recente		Versione delle 14:32, 16 feb 2022
Riga 16:		Riga 16:
	2. Import the downloaded image file into the virtual environment. Upon booting for the first time, the VM will start in '''recovery mode''', i.e. with only the bootloader and no phone firmware.		2. Import the downloaded image file into the virtual environment. Upon booting for the first time, the VM will start in '''recovery mode''', i.e. with only the bootloader and no phone firmware.

	~~<div class="mw-translate-fuzzy">~~		3. Access the predefined address 192.168.0.100:10080 from the GUI. In case UNSAFE_PORT error appears follow this procedure ([[AdminGuide:Procedures:ERR_UNSAFE_PORT_resolution_for_Chrome_and_Firefox/en\|Click here]]).
	3. Access the predefined address 192.168.0.100:10080 from the GUI. ~~If the OVA has bootloader version 1.0.5 or later, there is a console access~~ (~~with manager~~/~~manager credentials~~) ~~that allows you to change the IP address of the eth0 interface if it's not possible to access the predefined address~~.
	~~</div>~~

	'''~~NOTA~~:''' ~~E' disponibile un accesso~~ console (~~con credenziali~~ manager/manager, ~~accessibile solo nella modalità~~ recovery) ~~che permette di effettuare la modifica dell'indirizzo~~ IP ~~dell'interfaccia~~ eth0, ~~nel caso~~ in ~~cui non sia possibile accedere all'indirizzo predefinito~~ viq web browser.		'''NOTE:''' A console access is available (with manager/manager credentials, accessible only in recovery mode) that allows you to make the change of the IP address of the eth0 interface, in case you cannot access the default viq web browser address.

	4. Go to the ''Tools menu'' (click on the [[File:Menu tools button.png\|senza_cornice]] icon) in the top right to change your network configuration so that the PBX can access the internet and reach the license server.		4. Go to the ''Tools menu'' (click on the [[File:Menu tools button.png\|senza_cornice]] icon) in the top right to change your network configuration so that the PBX can access the internet and reach the license server.

Troccoli il 14:30, 16 feb 2022

2022-02-16T14:30:27Z

← Versione meno recente		Versione delle 14:30, 16 feb 2022
Riga 3:		Riga 3:


	1. Download the KalliopePBX virtual image file. KalliopePBX VM is available in VMWare ESXi 5.x environment or later.		1. Download the KalliopePBX virtual image file. KalliopePBX VM is available in VMWare ESXi 5.x environment or later. The two images differ for the maximum number of virtual CPUs that are visible from the kernel (up to 8 for the second, and over 8 up to a theoretical maximum of 128 for the first) and for the size of the system disk, which for the first is 120GB while for the second is limited to 40GB (values that can be increased with a simple procedure executable from the VMWare console).

	~~The OVA file can be downloaded at the following~~ link:		{\| class="wikitable"
	~~<!-~~-		\|-
	~~[http~~://~~www~~.~~kalliopepbx~~.~~com~~/~~drupal~~/~~sites~~/~~default~~/~~files~~/~~misc~~/download/vm/~~KalliopePBXv4-esxi5.0_bl-1.0.1-717.ova~~ KalliopePBXv4_esxi5_bl-1.0.1-~~717~~.ova]		! Image !! Download link
	~~-->~~		\|-
			\| KalliopePBX v4<br>(supports over 8vCPU) \|\| https://areaclienti.vianova.it/drive/download/BeWHIH36hbF12cM1/ (KalliopePBXv4_esxi5_128vcpu_120GB.ova)
			\|-
			\| KalliopePBX v4<br>(supports a maximum of 8vCPU) \|\| https://areaclienti.vianova.it/drive/download/bmOBoFRXDaSlcH2K/ (KalliopePBXv4_esxi5_bl-1.0.5-7156.ova)
			\|}

	* [https://areaclienti.~~vianova~~.~~it/drive/download/bmOBoFRXDaSlcH2K/ KalliopePBXv4_esxi5_bl-1~~.0.~~5-7156~~.~~ova] (40 GB Disk - MAX 8 vCPU)~~		2. Import the downloaded image file into the virtual environment. Upon booting for the first time, the VM will start in '''recovery mode''', i.e. with only the bootloader and no phone firmware.
	** md5: A3CE948432336DBEF32A68EE165005C1
	** sha256: BB02938985BAE46641A33E4CC8D5FAB784AD9F54A72704C6010A6E949B63A202

	* [https://areaclienti.~~vianova~~.~~it/drive/download/BeWHIH36hbF12cM1/ KalliopePBXv4_esxi5_128vcpu_120GB~~.~~ova] (120 GB Disk - MAX 128 vCPU)~~		<div class="mw-translate-fuzzy">
			3. Access the predefined address 192.168.0.100:10080 from the GUI. If the OVA has bootloader version 1.0.5 or later, there is a console access (with manager/manager credentials) that allows you to change the IP address of the eth0 interface if it's not possible to access the predefined address.
			</div>
	2. ~~Import~~ the ~~downloaded image file into~~ the ~~virtual environment~~. ~~Upon booting for~~ the ~~first time,~~ the ~~VM will start in '''recovery mode''~~'.

	~~3. Access the predefined address 192.168.0.100~~:~~10080 from the GUI. If the OVA has bootloader version 1.0.5 or later, there is a~~ console ~~access~~ (~~with~~ manager/manager ~~credentials~~) ~~that allows you to change the~~ IP ~~address of the~~ eth0 ~~interface if it~~'~~s not possible to access the predefined address~~.		'''NOTA:''' E' disponibile un accesso console (con credenziali manager/manager, accessibile solo nella modalità recovery) che permette di effettuare la modifica dell'indirizzo IP dell'interfaccia eth0, nel caso in cui non sia possibile accedere all'indirizzo predefinito viq web browser.

	4. Go to the ''Tools menu'' (click on the [[File:Menu tools button.png\|senza_cornice]] icon) in the top right to change your network configuration so that the PBX can access the internet and reach the license server.		4. Go to the ''Tools menu'' (click on the [[File:Menu tools button.png\|senza_cornice]] icon) in the top right to change your network configuration so that the PBX can access the internet and reach the license server.

S.vistoli il 07:39, 12 set 2019

2019-09-12T07:39:00Z

← Versione meno recente		Versione delle 07:39, 12 set 2019
Riga 29:		Riga 29:
	[[File:Attivazione licenza.png\|350px\|senza_cornice]]		[[File:Attivazione licenza.png\|350px\|senza_cornice]]

	~~<div class="mw-translate-fuzzy">~~
	6. Once the license has been activated, click on "''Register product''" to access the '''Recovery console'''.		6. Once the license has been activated, click on "''Register product''" to access the '''Recovery console'''.
	~~</div>~~

	[[File:Console_di_ripristino.png\|350px\|senza_cornice]]		[[File:Console_di_ripristino.png\|350px\|senza_cornice]]

S.vistoli il 07:38, 12 set 2019

2019-09-12T07:38:53Z

← Versione meno recente		Versione delle 07:38, 12 set 2019
Riga 25:		Riga 25:
	[[File:Menu tools.png\|150px\|senza_cornice]]		[[File:Menu tools.png\|150px\|senza_cornice]]

	~~<div class="mw-translate-fuzzy">~~
	5. Activate the KalliopePBX VM license with the activation key you were provided.		5. Activate the KalliopePBX VM license with the activation key you were provided.
	~~</div>~~

	[[File:Attivazione licenza.png\|350px\|senza_cornice]]		[[File:Attivazione licenza.png\|350px\|senza_cornice]]

S.vistoli il 07:38, 12 set 2019

2019-09-12T07:38:44Z

← Versione meno recente		Versione delle 07:38, 12 set 2019
Riga 21:		Riga 21:
	3. Access the predefined address 192.168.0.100:10080 from the GUI. If the OVA has bootloader version 1.0.5 or later, there is a console access (with manager/manager credentials) that allows you to change the IP address of the eth0 interface if it's not possible to access the predefined address.		3. Access the predefined address 192.168.0.100:10080 from the GUI. If the OVA has bootloader version 1.0.5 or later, there is a console access (with manager/manager credentials) that allows you to change the IP address of the eth0 interface if it's not possible to access the predefined address.

	~~<div class="mw-translate-fuzzy">~~
	4. Go to the ''Tools menu'' (click on the [[File:Menu tools button.png\|senza_cornice]] icon) in the top right to change your network configuration so that the PBX can access the internet and reach the license server.		4. Go to the ''Tools menu'' (click on the [[File:Menu tools button.png\|senza_cornice]] icon) in the top right to change your network configuration so that the PBX can access the internet and reach the license server.
	~~</div>~~

	[[File:Menu tools.png\|150px\|senza_cornice]]		[[File:Menu tools.png\|150px\|senza_cornice]]

S.vistoli il 07:37, 12 set 2019

2019-09-12T07:37:32Z

← Versione meno recente		Versione delle 07:37, 12 set 2019
Riga 10:		Riga 10:
	-->		-->

	* [https://areaclienti.vianova.it/drive/download/bmOBoFRXDaSlcH2K/ KalliopePBXv4_esxi5_bl-1.0.5-7156.ova] (40 GB ~~Disc~~ - MAX 8 vCPU)		* [https://areaclienti.vianova.it/drive/download/bmOBoFRXDaSlcH2K/ KalliopePBXv4_esxi5_bl-1.0.5-7156.ova] (40 GB Disk - MAX 8 vCPU)
	** md5: A3CE948432336DBEF32A68EE165005C1		** md5: A3CE948432336DBEF32A68EE165005C1
	** sha256: BB02938985BAE46641A33E4CC8D5FAB784AD9F54A72704C6010A6E949B63A202		** sha256: BB02938985BAE46641A33E4CC8D5FAB784AD9F54A72704C6010A6E949B63A202

S.vistoli: Creata pagina con "* [https://areaclienti.vianova.it/drive/download/BeWHIH36hbF12cM1/ KalliopePBXv4_esxi5_128vcpu_120GB.ova] (120 GB Disk - MAX 128 vCPU)"

2019-09-12T07:37:28Z

Creata pagina con "* [https://areaclienti.vianova.it/drive/download/BeWHIH36hbF12cM1/ KalliopePBXv4_esxi5_128vcpu_120GB.ova] (120 GB Disk - MAX 128 vCPU)"

← Versione meno recente		Versione delle 07:37, 12 set 2019
Riga 14:		Riga 14:
	** sha256: BB02938985BAE46641A33E4CC8D5FAB784AD9F54A72704C6010A6E949B63A202		** sha256: BB02938985BAE46641A33E4CC8D5FAB784AD9F54A72704C6010A6E949B63A202

	* [https://areaclienti.vianova.it/drive/download/BeWHIH36hbF12cM1/ KalliopePBXv4_esxi5_128vcpu_120GB.ova] (~~Disco~~ 120 GB - MAX 128 vCPU)		* [https://areaclienti.vianova.it/drive/download/BeWHIH36hbF12cM1/ KalliopePBXv4_esxi5_128vcpu_120GB.ova] (120 GB Disk - MAX 128 vCPU)

S.vistoli il 07:37, 12 set 2019

2019-09-12T07:37:17Z

← Versione meno recente		Versione delle 07:37, 12 set 2019
Riga 10:		Riga 10:
	-->		-->

	~~<div class="mw-translate-fuzzy">~~		* [https://areaclienti.vianova.it/drive/download/bmOBoFRXDaSlcH2K/ KalliopePBXv4_esxi5_bl-1.0.5-7156.ova] (40 GB Disc - MAX 8 vCPU)
	[https://areaclienti.vianova.it/drive/download/bmOBoFRXDaSlcH2K/ KalliopePBXv4_esxi5_bl-1.0.5-7156.ova] (md5: A3CE948432336DBEF32A68EE165005C1 - sha256: BB02938985BAE46641A33E4CC8D5FAB784AD9F54A72704C6010A6E949B63A202)		** md5: A3CE948432336DBEF32A68EE165005C1
	~~</div>~~		** sha256: BB02938985BAE46641A33E4CC8D5FAB784AD9F54A72704C6010A6E949B63A202

	* [https://areaclienti.vianova.it/drive/download/BeWHIH36hbF12cM1/ KalliopePBXv4_esxi5_128vcpu_120GB.ova] (Disco 120 GB - MAX 128 vCPU)		* [https://areaclienti.vianova.it/drive/download/BeWHIH36hbF12cM1/ KalliopePBXv4_esxi5_128vcpu_120GB.ova] (Disco 120 GB - MAX 128 vCPU)

FuzzyBot: Aggiornamento come da nuova versione della pagina di origine

2019-09-12T07:37:03Z

Aggiornamento come da nuova versione della pagina di origine

← Versione meno recente		Versione delle 07:37, 12 set 2019
Riga 10:		Riga 10:
	-->		-->

			<div class="mw-translate-fuzzy">
	[https://areaclienti.vianova.it/drive/download/bmOBoFRXDaSlcH2K/ KalliopePBXv4_esxi5_bl-1.0.5-7156.ova] (md5: A3CE948432336DBEF32A68EE165005C1 - sha256: BB02938985BAE46641A33E4CC8D5FAB784AD9F54A72704C6010A6E949B63A202)		[https://areaclienti.vianova.it/drive/download/bmOBoFRXDaSlcH2K/ KalliopePBXv4_esxi5_bl-1.0.5-7156.ova] (md5: A3CE948432336DBEF32A68EE165005C1 - sha256: BB02938985BAE46641A33E4CC8D5FAB784AD9F54A72704C6010A6E949B63A202)
			</div>

			* [https://areaclienti.vianova.it/drive/download/BeWHIH36hbF12cM1/ KalliopePBXv4_esxi5_128vcpu_120GB.ova] (Disco 120 GB - MAX 128 vCPU)


	2. Import the downloaded image file into the virtual environment. Upon booting for the first time, the VM will start in '''recovery mode'''.		2. Import the downloaded image file into the virtual environment. Upon booting for the first time, the VM will start in '''recovery mode'''.
Riga 16:		Riga 21:
	3. Access the predefined address 192.168.0.100:10080 from the GUI. If the OVA has bootloader version 1.0.5 or later, there is a console access (with manager/manager credentials) that allows you to change the IP address of the eth0 interface if it's not possible to access the predefined address.		3. Access the predefined address 192.168.0.100:10080 from the GUI. If the OVA has bootloader version 1.0.5 or later, there is a console access (with manager/manager credentials) that allows you to change the IP address of the eth0 interface if it's not possible to access the predefined address.

			<div class="mw-translate-fuzzy">
	4. Go to the ''Tools menu'' (click on the [[File:Menu tools button.png\|senza_cornice]] icon) in the top right to change your network configuration so that the PBX can access the internet and reach the license server.		4. Go to the ''Tools menu'' (click on the [[File:Menu tools button.png\|senza_cornice]] icon) in the top right to change your network configuration so that the PBX can access the internet and reach the license server.
			</div>

	[[File:Menu tools.png\|150px\|senza_cornice]]		[[File:Menu tools.png\|150px\|senza_cornice]]

			<div class="mw-translate-fuzzy">
	5. Activate the KalliopePBX VM license with the activation key you were provided.		5. Activate the KalliopePBX VM license with the activation key you were provided.
			</div>

	[[File:Attivazione licenza.png\|350px\|senza_cornice]]		[[File:Attivazione licenza.png\|350px\|senza_cornice]]

			<div class="mw-translate-fuzzy">
	6. Once the license has been activated, click on "''Register product''" to access the '''Recovery console'''.		6. Once the license has been activated, click on "''Register product''" to access the '''Recovery console'''.
			</div>

	[[File:Console_di_ripristino.png\|350px\|senza_cornice]]		[[File:Console_di_ripristino.png\|350px\|senza_cornice]]

Silvia il 07:39, 30 apr 2018

2018-04-30T07:39:22Z

← Versione meno recente		Versione delle 07:39, 30 apr 2018
Riga 36:		Riga 36:
	[[File:Console di ripristino fw.png\|350px\|senza_cornice]]		[[File:Console di ripristino fw.png\|350px\|senza_cornice]]

	10. Click on "''Install on the primary partition (p5)''". KalliopePBX will warn you that this will reset the partition erasing all data and ask for confirmation. <br>		10. Click on "''Install on the primary partition (p5)''". KalliopePBX will warn you that this will reset the partition erasing all data and ask for confirmation.<br>
	Since this is the first installation, confirm the request.<br>'''''N.B.: Installing firmware from the recovery console will restore the machine to factory conditions. This can be useful when you need to completely reset a machine.'''''		Since this is the first installation, confirm the request.<br>'''''N.B.: Installing firmware from the recovery console will restore the machine to factory conditions. This can be useful when you need to completely reset a machine.'''''